Power House Ice Eater Deicers

Home
Products
Winterization
Power House Ice Eater Deicer | P1000 Series

Power House Ice Eater Deicers | P1000 Series

Power House Ice Eaters quickly melt ice and prevent new ice from forming by driving warm water to the surface. These heavy-duty Ice Eaters feature a unique "flared shroud" that facilitates more efficient water flow. Designed for use in both saltwater and freshwater applications. All Powerhouse Ice Eaters are expertly crafted in the USA. NOTE: Use of extension cords is not recommended with de-icers, as it results in reduced performance and may damage the unit.

Quick Comparison Guide
Ice Eater Model	Motor	Voltage	Start Up Amps	Running Amps	Running kWh	Thrust	Typical Cleared Area*
P250	1/4 HP	115V	5	2.5	0.30	20 lbs.	20' to 25' Diameter
P250	1/4 HP	230V	2.5	1.25	0.30	20 lbs.	20' to 25' Diameter
P500	1/2 HP	115V	10	5.0	0.58	28 lbs.	Up to 40' Diameter
P500	1/2 HP	230V	5	2.5	0.58	28 lbs.	Up to 40' Diameter
P750	3/4 HP	115V	20	4.7	0.54	32 lbs.	Up to 60' Diameter
P750	3/4 HP	230V	10	2.35	0.54	32 lbs.	Up to 60' Diameter
P1000	1 HP	115V	30	7	0.81	36 lbs.	Up to 80' Diameter
P1000	1 HP	230V	15	3.5	0.81	36 lbs.	Up to 80' Diameter
*Extreme winter conditions may result in a smaller open diameter.

Features
Specifications	Volt motor: 115V or 230V Typically clears up to 80' diameter (cleared area may vary in extreme conditions) Patented PVC outer design improves water flow and accuracy with 4 de-icing patterns 25', 50', 100' or 150' power cords are oil and water resistant Extreme duty power cords prevent loss of voltage as electricity passes from power source to deicer unit Stainless steel motor shaft and housing with bronze end bell resist corrosion Heavy-duty PVC custom brackets attach motor to shroud; All bolts and nuts are stainless steel Includes aluminum anode; two 25' suspension lines and set of two shackles
Durability and Performance	Patented Venturi Styled Heavy-Duty PVC Housing Designed for Superior Water Flow and Protection Performance certified tested for proper output and leaks before shipment 316 stainless steel motor shaft and housing with bronze end bell to resist corrosion Internal, heavy-duty, hard-faced mechanical seal with stainless steel components Additional double lip shaft seal for extra protection Two heavy-duty ball bearings provide support for the rotor while being cooled with dielectric lubricating fluid
Other Uses	Functions as a circulator to deter winter fish kills Acts as an aerator in warmer months to minimize mosquito reproduction Creates a current to avoid algae or debris buildup Directs algae or debris to a designated area for easy collection
Warranty	3 year limited warranty - Best warranty in the market
Mounting Options	Two 25’ hollow braided polypropylene lines with ¼” stainless steel shackles come standard with every Ice Eater purchase 50’ lines are available for an additional charge Dock Mount Shallow Water/Waterfowl Stand
Cord Lengths	Standard 25' water and oil resistant quick change cord with three-prong molded plug Available cord lengths: 50', 100', 150' 200' cord and above available for 230 volt only
Energy Efficient	Extreme duty power cords prevent loss of voltage as electricity passes from power source to Powerhouse Ice Eater Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor
Low Maintenance	Power House servicing suggested every 4-5 years to ensure your Ice Eater is running at peak performance Propeller screws on shaft for easy removal and replacement Quick change power connection cord for easy on-site replacement
Environmentally Friendly	Uses synthetic dielectric lubricating fluid: Non-toxic Biodegradable Non-bioaccumulating Uses aluminum alloy anodes: Does not have cadmium like zinc alloy Best type of anode for all water types
Safety Tested	Motor exceeds NEMA specifications UL and CSA compliant CE certified
American Made	Each Power House Ice Eater is assembled in Owings Mills, Maryland from parts manufactured in the USA

Replacement Parts

Power House Ice Eater Aluminum Anode, Propeller and Power Cord replacement parts are available

Shipping

Leaves warehouse in 1-2 business days
Click here for nationwide transit times

Prop 65 Warning

About Power House

Power House, Inc. was established in 1947 and has since developed a unique method of melting and preventing ice buildup around boats and piers. The original goal of Power House was to provide a dependable, affordable and efficient "insurance policy" for marinas, waterfront property and boat owners. Their mission is to produce the most dependable, energy-efficient products possible using the highest quality materials and environmentally friendly equipment.